|
1.
The solar charger should be charged by AC-DC
power at least 8 hours firstly before using
it..jpg.jpg)
2. Keep
the solar panels facing to the sunlight; The DC-in LED is orange when the sun or
AC-DC
adaptor
charges the lithium built-in battery, it shows green when
it is fully-charged.
3. The
AC-DC adaptor can charge lithium built-in battery through the DC-in socket at home. Please
pull out the
connection cable from the DC-in socket after DC–IN LED turn to green.
4. The
DC-out socket is an output socket. Plug the connection cable into the socket
firstly and
adjust the voltage (5.7V; 7.6V; 9.8V) to match the
charging voltage of your equipments. For USB,
mini USB and most mobile phones is 5.7V. If you
are not sure about it, please try the voltage one
by one from
the low to the high.
5. The DC-out LED is
orange when the solar charger charges the mobile phone and other electrical
power
products, it is green after fully charged. Please pull out the connection cable
from the DC-
OUT socket.
6
6. The solar charger can be used
as emergency flashlight by switching the ON and OFF, please turn
it off to save the electricity
when it is not used.
7. Six major brand phone adapters
are provided for one set charger. Please buy exactly socket at
local market if it can not
match your mobile phone.
8. Keep it away from fire, water
and moist places in order to avoid explosion, leakage and moisture.
Any severe shocks are
forbidden for the solar chargers.
9. Nobody except professional technicians is
permitted to disassemble the solar charger in order to
avoid damaging the charger.
|